dmesg - Full Benchmark

Return To Full Benchmark System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-14-generic (buildd@allspice) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #21-Ubuntu SMP Tue Nov 12 17:04:55 UTC 2013 (Ubuntu 3.11.0-14.21-generic 3.11.7)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000973ff] usable
BIOS-e820: [mem 0x0000000000097400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c7faffff] usable
BIOS-e820: [mem 0x00000000c7fb0000-0x00000000c7fbdfff] ACPI data
BIOS-e820: [mem 0x00000000c7fbe000-0x00000000c7fdffff] ACPI NVS
BIOS-e820: [mem 0x00000000c7fe0000-0x00000000c7ffffff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000437ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Hewlett-Packard p6610f/2AB1 , BIOS 6.02 07/21/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x438000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFF8000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000438000000 aka 17280M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xc7fb0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000091000] 91000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd1000, 0x01fd1fff] PGTABLE
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
init_memory_mapping: [mem 0x437e00000-0x437ffffff]
 [mem 0x437e00000-0x437ffffff] page 2M
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x434000000-0x437dfffff]
 [mem 0x434000000-0x437dfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x433ffffff]
 [mem 0x400000000-0x433ffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xc7faffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0xbfffffff] page 1G
 [mem 0xc0000000-0xc7dfffff] page 2M
 [mem 0xc7e00000-0xc7faffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
 [mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x35d2a000-0x36e8cfff]
ACPI: RSDP 00000000000fb030 00024 (v02 HPQOEM)
ACPI: XSDT 00000000c7fb0100 0006C (v01 HPQOEM SLIC-CPC 20100721 MSFT 00000097)
ACPI: FACP 00000000c7fb0290 000F4 (v03 HPQOEM SLIC-CPC 20100721 MSFT 00000097)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130517/tbfadt-603)
ACPI: DSDT 00000000c7fb05d0 04AB6 (v01 HPQOEM SLIC-CPC 00000721 INTL 20051117)
ACPI: FACS 00000000c7fbe000 00040
ACPI: APIC 00000000c7fb0390 0007C (v01 HPQOEM SLIC-CPC 20100721 MSFT 00000097)
ACPI: MCFG 00000000c7fb0410 0003C (v01 HPQOEM SLIC-CPC 20100721 MSFT 00000097)
ACPI: SLIC 00000000c7fb0450 00176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
ACPI: OEMB 00000000c7fbe040 00072 (v01 HPQOEM SLIC-CPC 20100721 MSFT 00000097)
ACPI: SSDT 00000000c7fba6b0 00843 (v01 HPQOEM SLIC-CPC 00000001 INTL 20051117)
ACPI: SRAT 00000000c7fbaf00 000E8 (v03 HPQOEM SLIC-CPC 00000002 AMD  00000001)
ACPI: HPET 00000000c7fbaff0 00038 (v01 HPQOEM SLIC-CPC 20100721 MSFT 00000097)
ACPI: SSDT 00000000c7fbb030 0088C (v01 HPQOEM SLIC-CPC 00000001 AMD  00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
SRAT: Node 0 PXM 0 [mem 0x00100000-0xc7ffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x437ffffff]
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xc7ffffff] -> [mem 0x00000000-0xc7ffffff]
NUMA: Node 0 [mem 0x00000000-0xc7ffffff] + [mem 0x100000000-0x437ffffff] -> [mem 0x00000000-0x437ffffff]
Initmem setup node 0 [mem 0x00000000-0x437ffffff]
  NODE_DATA [mem 0x437ff9000-0x437ffdfff]
 [ffffea0000000000-ffffea0010dfffff] PMD -> [ffff880427600000-ffff8804375fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x437ffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x00096fff]
  node   0: [mem 0x00100000-0xc7faffff]
  node   0: [mem 0x100000000-0x437ffffff]
On node 0 totalpages: 4194118
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3990 pages, LIFO batch:0
  DMA32 zone: 12735 pages used for memmap
  DMA32 zone: 815024 pages, LIFO batch:31
  Normal zone: 52736 pages used for memmap
  Normal zone: 3375104 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
smpboot: Allowing 6 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x00097000-0x00097fff]
PM: Registered nosave memory: [mem 0x00098000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
PM: Registered nosave memory: [mem 0xc7fb0000-0xc7fbdfff]
PM: Registered nosave memory: [mem 0xc7fbe000-0xc7fdffff]
PM: Registered nosave memory: [mem 0xc7fe0000-0xc7ffffff]
PM: Registered nosave memory: [mem 0xc8000000-0xffefffff]
PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
e820: [mem 0xc8000000-0xffefffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880437c00000 s86720 r8192 d23872 u262144
pcpu-alloc: s86720 r8192 d23872 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - - 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4128562
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ bc000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ bc000000
PM: Registered nosave memory: [mem 0xbc000000-0xbfffffff]
Memory: 16347656K/16776472K available (7143K kernel code, 1082K rwdata, 3260K rodata, 1364K init, 1420K bss, 428816K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:728 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2892.903 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5785.80 BogoMIPS (lpj=11571612)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27804 entries in 109 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Athlon(tm) II X4 635 Processor (fam: 10, model: 05, stepping: 03)
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node   0, Processors  #1 #2 #3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (23143.22 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xc7fbe000-0xc7fdffff] (139264 bytes)
regulator-dummy: no parameters
RTC time:  2:07:33, date: 03/29/14
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000c8000000 aka 3200M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [c8000000, dfffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ffefffff]
TOM2: 0000000438000000 aka 17280M
bus: [bus 00-07] on node 0 link 0
bus: 00 [io  0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xc8000000-0xdfffffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x438000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc8000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io  0xc000-0xc007]
pci 0000:00:11.0: reg 0x14: [io  0xb000-0xb003]
pci 0000:00:11.0: reg 0x18: [io  0xa000-0xa007]
pci 0000:00:11.0: reg 0x1c: [io  0x9000-0x9003]
pci 0000:00:11.0: reg 0x20: [io  0x8000-0x800f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe9ffc00-0xfe9fffff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe9fe000-0xfe9fefff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 0x10: [mem 0xfe9fd000-0xfe9fdfff]
pci 0000:00:12.1: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe9ff800-0xfe9ff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe9fc000-0xfe9fcfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xfe9fb000-0xfe9fbfff]
pci 0000:00:13.1: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe9ff400-0xfe9ff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [10de:0ca3] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0xd800-0xd87f]
pci 0000:01:00.0: reg 0x30: [mem 0xfcf80000-0xfcffffff pref]
pci 0000:01:00.1: [10de:0be4] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfcf7c000-0xfcf7ffff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:02.0:   bridge window [mem 0xfcf00000-0xfdffffff]
pci 0000:00:02.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io  0xe800-0xe8ff]
pci 0000:03:00.0: reg 0x18: [mem 0xfebff000-0xfebfffff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xfbffc000-0xfbffffff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:0a.0:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:0a.0:   bridge window [mem 0xfbf00000-0xfbffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xc8000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs *4 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00097400-0x0009ffff]
e820: reserve RAM buffer [mem 0xc7fb0000-0xc7ffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io  0x04d0-0x04d1] has been reserved
system 00:07: [io  0x040b] has been reserved
system 00:07: [io  0x04d6] has been reserved
system 00:07: [io  0x0c00-0x0c01] has been reserved
system 00:07: [io  0x0c14] has been reserved
system 00:07: [io  0x0c50-0x0c51] has been reserved
system 00:07: [io  0x0c52] has been reserved
system 00:07: [io  0x0c6c] has been reserved
system 00:07: [io  0x0c6f] has been reserved
system 00:07: [io  0x0cd0-0x0cd1] has been reserved
system 00:07: [io  0x0cd2-0x0cd3] has been reserved
system 00:07: [io  0x0cd4-0x0cd5] has been reserved
system 00:07: [io  0x0cd6-0x0cd7] has been reserved
system 00:07: [io  0x0cd8-0x0cdf] has been reserved
system 00:07: [io  0x0800-0x089f] could not be reserved
system 00:07: [io  0x0b00-0x0b0f] has been reserved
system 00:07: [io  0x0b20-0x0b3f] has been reserved
system 00:07: [io  0x0900-0x090f] has been reserved
system 00:07: [io  0x0910-0x091f] has been reserved
system 00:07: [io  0xfe00-0xfefe] has been reserved
system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io  0x0e00-0x0e0f] has been reserved
system 00:08: [io  0x0e80-0x0e8f] has been reserved
system 00:08: [io  0x0f40-0x0f4f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0a: [mem 0x00100000-0xc7ffffff] could not be reserved
system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:02.0:   bridge window [mem 0xfcf00000-0xfdffffff]
pci 0000:00:02.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:0a.0:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:0a.0:   bridge window [mem 0xfbf00000-0xfbffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc8000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfdffffff]
pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:03: resource 2 [mem 0xfbf00000-0xfbffffff 64bit pref]
pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xc8000000-0xdfffffff]
pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17804K (ffff880035d2a000 - ffff880036e8d000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ bc000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1396058853.784:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 32092
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe9ff800
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-14-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xfe9ff400
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-14-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 4f57df1a3429640d83ffde722907e1377213486f'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
  Magic number: 6:434:107
rtc_cmos 00:02: setting system clock to 2014-03-29 02:07:34 UTC (1396058854)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1036K (ffff8800016fd000 - ffff880001800000)
Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
systemd-udevd[118]: starting version 204
mii: module verification failed: signature and/or required key missing - tainting kernel
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
ohci-pci: OHCI PCI platform driver
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0: irq 42 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xffffc90001876000, d4:85:64:a3:b2:fa, XID 0c200000 IRQ 42
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 22
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 16, io mem 0xfe9fe000
systemd-udevd[124]: renamed network interface eth0 to p10p1
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.11.0-14-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci-pci 0000:00:12.1: OHCI PCI host controller
ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.1: irq 16, io mem 0xfe9fd000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.11.0-14-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfe9fc000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.11.0-14-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.1: irq 18, io mem 0xfe9fb000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.11.0-14-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: WDC WD3200AAKS-00B3A0, 01.03A01, max UDMA/133
ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-8: WDC WD10EAVS-00D7B1, 01.01A01, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata4.00: ATA-8: WDC WD7501AAES-60Z2A0, 06.01D06, max UDMA/100
ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/100
ata1.00: ATA-7: Hitachi HDT725032VLA380, V54OA7BA, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDT72503 V54O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access     ATA      WDC WD3200AAKS-0 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access     ATA      WDC WD10EAVS-00D 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access     ATA      WDC WD7501AAES-6 06.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
 sdc: [mac] sdc1 sdc2 sdc3 sdc4
sd 2:0:0:0: [sdc] Attached SCSI disk
 sdd: sdd1 sdd2 < sdd5 >
sd 3:0:0:0: [sdd] Attached SCSI disk
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
usb 5-1: new full-speed USB device number 2 using ohci-pci
bio: create slab  at 1
usb 5-1: New USB device found, idVendor=058f, idProduct=9254
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: Generic USB Hub
usb 5-1: Manufacturer: ALCOR
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 2892.749 MHz
usb 5-1.3: new low-speed USB device number 3 using ohci-pci
usb 5-1.3: New USB device found, idVendor=04f2, idProduct=0841
usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.3: Product: HP USB Multimedia Keyboard
usb 5-1.3: Manufacturer: CHICONY
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: CHICONY HP USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1.3/5-1.3:1.0/input/input2
hid-generic 0003:04F2:0841.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY HP USB Multimedia Keyboard] on usb-0000:00:13.0-1.3/input0
input: CHICONY HP USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1.3/5-1.3:1.1/input/input3
hid-generic 0003:04F2:0841.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY HP USB Multimedia Keyboard] on usb-0000:00:13.0-1.3/input1
usb 5-1.4: new low-speed USB device number 4 using ohci-pci
usb 5-1.4: New USB device found, idVendor=093a, idProduct=2510
usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.4: Product: USB OPTICAL MOUSE
usb 5-1.4: Manufacturer: PIXART
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1.4/5-1.4:1.0/input/input4
hid-generic 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:13.0-1.4/input0
Switched to clocksource tsc
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
Adding 16777212k swap on /dev/mapper/FUSiON--VMS--vg-swap_1.  Priority:-1 extents:1 across:16777212k FS
IPv6: ADDRCONF(NETDEV_UP): p10p1: link is not ready
systemd-udevd[374]: starting version 204
lp: driver loaded but no devices found
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
FAT-fs (sdc2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
wmi: Mapper loaded
MCE: In-kernel MCE decoding enabled.
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
EDAC MC: Ver: 3.0.0
[drm] Initialized drm 1.1.0 20060810
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x3c
sp5100_tco: failed to find MMIO address, giving up.
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
hda-intel 0000:00:14.2: Using LPIB position fix
hda-intel 0000:00:14.2: Enable sync_write for stable communication
SKU: Nid=0x1d sku_cfg=0x4005e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   dig-out=0x11/0x0
   inputs:
     Front Mic=0x19
     Rear Mic=0x18
     Line=0x1a
realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0888
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
hda-intel 0000:01:00.1: Enable delay in RIRB handling
microcode: CPU0: patch_level=0x010000b6
microcode: CPU0: new patch_level=0x010000c8
microcode: CPU1: patch_level=0x010000b6
microcode: CPU1: new patch_level=0x010000c8
microcode: CPU2: patch_level=0x010000b6
microcode: CPU2: new patch_level=0x010000c8
microcode: CPU3: patch_level=0x010000b6
microcode: CPU3: new patch_level=0x010000c8
microcode: Microcode Update Driver: v2.00 , Peter Oruba
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.38  Wed Jan  8 19:32:30 PST 2014
ip6_tables: (C) 2000-2006 Netfilter Core Team
type=1400 audit(1396058871.887:2): apparmor="STATUS" operation="profile_load" parent=545 profile="unconfined" name="/sbin/dhclient" pid=547 comm="apparmor_parser"
type=1400 audit(1396058871.887:3): apparmor="STATUS" operation="profile_load" parent=545 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=547 comm="apparmor_parser"
type=1400 audit(1396058871.887:4): apparmor="STATUS" operation="profile_load" parent=545 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=547 comm="apparmor_parser"
type=1400 audit(1396058871.887:5): apparmor="STATUS" operation="profile_replace" parent=493 profile="unconfined" name="/sbin/dhclient" pid=494 comm="apparmor_parser"
type=1400 audit(1396058871.887:6): apparmor="STATUS" operation="profile_replace" parent=493 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=494 comm="apparmor_parser"
type=1400 audit(1396058871.887:7): apparmor="STATUS" operation="profile_replace" parent=493 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=494 comm="apparmor_parser"
type=1400 audit(1396058871.887:8): apparmor="STATUS" operation="profile_replace" parent=545 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=547 comm="apparmor_parser"
type=1400 audit(1396058871.887:9): apparmor="STATUS" operation="profile_replace" parent=545 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=547 comm="apparmor_parser"
type=1400 audit(1396058871.887:10): apparmor="STATUS" operation="profile_replace" parent=493 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=494 comm="apparmor_parser"
type=1400 audit(1396058871.887:11): apparmor="STATUS" operation="profile_replace" parent=493 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=494 comm="apparmor_parser"
init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
r8169 0000:03:00.0 p10p1: link down
r8169 0000:03:00.0 p10p1: link down
IPv6: ADDRCONF(NETDEV_UP): p10p1: link is not ready
init: udev-fallback-graphics main process (884) terminated with status 1
r8169 0000:03:00.0 p10p1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): p10p1: link becomes ready
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
init: failsafe main process (1067) killed by TERM signal
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
init: idmapd main process (1180) terminated with status 1
init: idmapd main process ended, respawning
audit_printk_skb: 6 callbacks suppressed
type=1400 audit(1396058886.611:14): apparmor="STATUS" operation="profile_load" parent=1195 profile="unconfined" name="lxc-container-default" pid=1208 comm="apparmor_parser"
type=1400 audit(1396058886.611:15): apparmor="STATUS" operation="profile_load" parent=1195 profile="unconfined" name="lxc-container-default-with-mounting" pid=1208 comm="apparmor_parser"
type=1400 audit(1396058886.611:16): apparmor="STATUS" operation="profile_load" parent=1195 profile="unconfined" name="lxc-container-default-with-nesting" pid=1208 comm="apparmor_parser"
type=1400 audit(1396058886.611:17): apparmor="STATUS" operation="profile_replace" parent=1195 profile="unconfined" name="lxc-container-default-with-mounting" pid=1208 comm="apparmor_parser"
type=1400 audit(1396058886.611:18): apparmor="STATUS" operation="profile_replace" parent=1195 profile="unconfined" name="lxc-container-default-with-nesting" pid=1208 comm="apparmor_parser"
type=1400 audit(1396058886.611:19): apparmor="STATUS" operation="profile_replace" parent=1195 profile="unconfined" name="lxc-container-default-with-nesting" pid=1208 comm="apparmor_parser"
type=1400 audit(1396058886.615:20): apparmor="STATUS" operation="profile_replace" parent=1195 profile="unconfined" name="/sbin/dhclient" pid=1209 comm="apparmor_parser"
type=1400 audit(1396058886.615:21): apparmor="STATUS" operation="profile_replace" parent=1195 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1209 comm="apparmor_parser"
type=1400 audit(1396058886.615:22): apparmor="STATUS" operation="profile_replace" parent=1195 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1209 comm="apparmor_parser"
type=1400 audit(1396058886.615:23): apparmor="STATUS" operation="profile_replace" parent=1195 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1209 comm="apparmor_parser"
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
Bridge firewalling registered
init: samba-ad-dc main process (1213) terminated with status 1
audit_printk_skb: 177 callbacks suppressed
type=1400 audit(1396058864.398:83): apparmor="STATUS" operation="profile_replace" parent=1361 profile="unconfined" name="/usr/sbin/mysqld" pid=1500 comm="apparmor_parser"
type=1400 audit(1396058864.406:84): apparmor="STATUS" operation="profile_replace" parent=1378 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1508 comm="apparmor_parser"
type=1400 audit(1396058864.406:85): apparmor="STATUS" operation="profile_replace" parent=1378 profile="unconfined" name="/usr/sbin/cupsd" pid=1508 comm="apparmor_parser"
type=1400 audit(1396058864.406:86): apparmor="STATUS" operation="profile_replace" parent=1378 profile="unconfined" name="/usr/sbin/cupsd" pid=1508 comm="apparmor_parser"
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: cups main process (1510) killed by HUP signal
init: cups main process ended, respawning
type=1400 audit(1396058865.930:87): apparmor="STATUS" operation="profile_replace" parent=1596 profile="unconfined" name="/usr/bin/lxc-start" pid=1601 comm="apparmor_parser"
type=1400 audit(1396058865.938:88): apparmor="STATUS" operation="profile_replace" parent=1602 profile="unconfined" name="lxc-container-default" pid=1606 comm="apparmor_parser"
type=1400 audit(1396058865.938:89): apparmor="STATUS" operation="profile_replace" parent=1602 profile="unconfined" name="lxc-container-default-with-mounting" pid=1606 comm="apparmor_parser"
type=1400 audit(1396058865.938:90): apparmor="STATUS" operation="profile_replace" parent=1602 profile="unconfined" name="lxc-container-default-with-nesting" pid=1606 comm="apparmor_parser"
type=1400 audit(1396058865.938:91): apparmor="STATUS" operation="profile_replace" parent=1602 profile="unconfined" name="lxc-container-default-with-mounting" pid=1606 comm="apparmor_parser"
type=1400 audit(1396058865.938:92): apparmor="STATUS" operation="profile_replace" parent=1602 profile="unconfined" name="lxc-container-default-with-nesting" pid=1606 comm="apparmor_parser"
aufs 3.x-rcN-20130902
init: nvidia-persistenced main process (1762) terminated with status 1
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81cd2940)
usb 5-1.4: USB disconnect, device number 4
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x484 offMax=0x157c
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.8 (interface 0x001a0007).
usb 5-1.4: new low-speed USB device number 5 using ohci-pci
usb 5-1.4: New USB device found, idVendor=093a, idProduct=2510
usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.4: Product: USB OPTICAL MOUSE
usb 5-1.4: Manufacturer: PIXART
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1.4/5-1.4:1.0/input/input17
hid-generic 0003:093A:2510.0004: input,hidraw2: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:13.0-1.4/input0
vboxpci: IOMMU not found (not registered)
Ebtables v2.0 registered
nvidia 0000:01:00.0: irq 43 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
init: plymouth-stop pre-start process (2342) terminated with status 1
audit_printk_skb: 3 callbacks suppressed
type=1400 audit(1396058894.529:94): apparmor="STATUS" operation="profile_replace" parent=2370 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2374 comm="apparmor_parser"
type=1400 audit(1396058894.529:95): apparmor="STATUS" operation="profile_replace" parent=2370 profile="unconfined" name="/usr/sbin/cupsd" pid=2374 comm="apparmor_parser"
type=1400 audit(1396058894.529:96): apparmor="STATUS" operation="profile_replace" parent=2370 profile="unconfined" name="/usr/sbin/cupsd" pid=2374 comm="apparmor_parser"
nvidia 0000:01:00.0: irq 43 for MSI/MSI-X
[UFW BLOCK] IN=p10p1 OUT= MAC=01:00:5e:00:00:fb:b4:18:d1:3a:2b:6f:08:00 SRC=192.168.1.125 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=21770 PROTO=2 
[UFW BLOCK] IN=p10p1 OUT= MAC=33:33:00:00:00:fb:3c:07:54:21:89:d2:86:dd SRC=fe80:0000:0000:0000:3e07:54ff:fe21:89d2 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=1496 TC=0 HOPLIMIT=255 FLOWLBL=136563 FRAG:1448 INCOMPLETE ID:a6398b6c PROTO=UDP 
[UFW BLOCK] IN=p10p1 OUT= MAC=33:33:00:00:00:fb:3c:07:54:21:89:d2:86:dd SRC=fe80:0000:0000:0000:3e07:54ff:fe21:89d2 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=1496 TC=0 HOPLIMIT=255 FLOWLBL=136563 FRAG:2896 INCOMPLETE ID:a6398b6c PROTO=UDP 
[UFW BLOCK] IN=p10p1 OUT= MAC=33:33:00:00:00:fb:3c:07:54:21:89:d2:86:dd SRC=fe80:0000:0000:0000:3e07:54ff:fe21:89d2 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=1496 TC=0 HOPLIMIT=255 FLOWLBL=136563 FRAG:4344 INCOMPLETE ID:a6398b6c PROTO=UDP 
[UFW BLOCK] IN=p10p1 OUT= MAC=33:33:00:00:00:fb:3c:07:54:21:89:d2:86:dd SRC=fe80:0000:0000:0000:3e07:54ff:fe21:89d2 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=1395 TC=0 HOPLIMIT=255 FLOWLBL=136563 FRAG:5792 ID:a6398b6c PROTO=UDP 
type=1400 audit(1396093184.066:97): apparmor="STATUS" operation="profile_replace" parent=29062 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=29066 comm="apparmor_parser"
type=1400 audit(1396093184.066:98): apparmor="STATUS" operation="profile_replace" parent=29062 profile="unconfined" name="/usr/sbin/cupsd" pid=29066 comm="apparmor_parser"
type=1400 audit(1396093184.070:99): apparmor="STATUS" operation="profile_replace" parent=29062 profile="unconfined" name="/usr/sbin/cupsd" pid=29066 comm="apparmor_parser"
systemd-hostnamed[25531]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[1146]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
vlc[16381]: segfault at 7f93e111b140 ip 00007f93e111b140 sp 00007f9419d65438 error 7 in libaccess_http_plugin.so[7f93e111a000+7000]
[UFW BLOCK] IN=p10p1 OUT= MAC=01:00:5e:00:00:fb:b4:18:d1:3a:2b:6f:08:00 SRC=192.168.1.125 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=43766 PROTO=2 
[UFW BLOCK] IN=p10p1 OUT= MAC=01:00:5e:00:00:fb:8c:7b:9d:24:e1:9f:08:00 SRC=192.168.1.120 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=55330 PROTO=2 

Return To Full Benchmark System Information